Randall RM-100M Head Preloaded

Modules Options
Metal grille with Clean, Treadplate & Ultra Modules
Metal grille with Blackface, Plexi & XTC Module
Silver cloth grille with Blackface, Plexi & XTC Modules
Palomino covering & Tweed grille with Blackface, Plexi & XTC

• Randall Guitar Amplifiers
• Other products by Randall
• Similar priced Guitar Amplifiers
• Similar priced Heads
• Guitar Amplifiers special offers

Zoom in
£ Inc. VAT

Ask us a question

Randall RM-100M

The new flagship sets the standard and will forever revolutionize how future tube heads are designed. The RM100 is both traditional and modern technology rolled into one amplifier. First, you have 3 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like only its clean or hi-gain tone. Build this amp with your clean, your rhythm, and your hi-gain tone for a complete custom set up. With more than a dozen tube preamps always available, chances are youÍll have a hard time picking just three.

Change and bias your own power tubes!
Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.

MIDI channel switching and capability!
Connect your RM100 to any MIDI capable external processing and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect, using the included RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the processor to save the preset. The included footswitch will then select both the RM100 channel and effect you want at the same time.

Specifications:


Holds 3 Preamp Modules

100 Watts

6L6 Power tubes on RM100S models

E34L JJ power tubes on RM100M models

RM100M features metal grille

MIDI in/thru

Master Volume, Presence, Density controls

Parallel loop w/front panel mix control

Series loop

Rear tube bias section

Slave out

3-button MIDI footswitch included

World voltage AC input selector (100/120/220/240)

Also available with factory preloaded modules as:


RM100M1 - Metal grille - Clean, Treadplate & Ultra Modules

RM100M2 - Metal grille - Blackface, Plexi & XTC Modules

RM100S2 - Silver cloth grille - Blackface, Plexi & XTC Modules

RM100P2 - Palomino covering & Tweed grille - Blackface, Plexi & XTC Modules

• Bass Amplifiers
  Power Amp, Pre Amp


• Guitar Amplifiers
  Acoustic Amps, Amplifier Accessories, Cabs, Combos, Heads, Practice Amps


• Keyboard Amplification
  Large Combos, Medium Combos, Small Combos