 |  | Mark Bass Classic 300 Bass Amplifiers Heads Mark Bass Bass Amplifiers
Mark Bass Mark Bass Heads
Mark Bass Classic 300
Here's a beautiful example of how old and new technology can and should work together. The heart of the classic 300 is it's tubes. The brain is it's microprocessor. Ten tubes give it the warmth and fullness of a great old amps that are now ageing or retired. But times have changed. Don't you think it's about time you got an amp that looks after itself? The Classic's futuristic onboard processor re-biases your tubes every time you start up the amp, allows you to customise you bias adjustments, and tells you if any tubes need to be replaced! Tube amps used to be finicky and unreliable. Now you won't have any nasty surprises on the gig, and you'll know excatly when and how your tubes need to be serviced. This handsome head puts out a loud 300 watts of power!
Specifications:
INPUTS
INPUT
impedance 500 Kohm, max. voltage 5 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 15 Vpp
CONTROLS
GAIN
–60 dB to +35 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel
EQUALIZATION
LOW
center frequency: 80 Hz; level: ±12 dB
LOW MID
center frequency: 400 Hz, level: ±12 dB
HIGH MID
center frequency: 800 Hz, level: ±12 dB
HIGH
center frequency: 3 kHz, level: ±12 dB
OUTPUT
LINE OUT
balanced XLR, max. voltage 25 Vpp
EFFECT SEND
unbalanced, max. voltage 18 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2.5 Vpp
SPEAKER OUT
2x speakon/1/4" combo jacks
OTHER
WEIGHT
48.06 lbs / 21,8 kg
DEPTH
12.44 in. / 31.6 cm
HEIGHT
11.65 in. / 29.6 cm
WIDTH
19.76 in. / 50.2 cm
OPTIONAL FOOTSWITCH
mute
OUTPUT POWER
300W @ 4 ohms or 2 ohms, 175W @ 8 ohms
POWER REQUIREMENT
100V; 120V; 230V; 240V
50/60Hz
|
Errors & omissions excepted, © Copyright 2002-2009 GAK.CO.UK LTD
|
| | | Search |
|---|
|
|
Inc. VAT
Ask us a question
Home
Basket
Checkout
Order Tracking
Contact Us