Diago Powerstation

Fx/Pedals

Diago Fx/Pedals

Diago

Zoom in

Inc. VAT

Ask us a question

Pedal Power!

The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum - or your money back.

Powering multiple effects pedals has long been a problem, and there are many power supplies available at varying costs, quality, compatibility and performance. Most pedal power supplies are transformer type, linear regulated designs, which are cheap to design and develop, but are expensive to make (and therefore buy), noisier, bigger, heavier and they get much hotter!

Cheaper power supplies are usually under-rated, unregulated, poorly filtered designs that polute your guitar's signal with splurges of noise and hum. More expensive power supplies are often engineering marvels, but there really is no need and they cost far too much.

The Diago Powerstation uses digital switch mode technology, making it quiet, light, efficient and small, reliably powering your pedals so you can concentrate on making music.

Specifications

Output: 9V DC @ 3,000 mA (25W)
Input: 90-264VAC @ 50-60Hz
Efficiency: ~80%
Line Regulation: ±0.5% max
Load Regulation: ±1% max
Mains Cable Inlet:2m Figure 8 Lead IEC320-C8
Output Barrel: 2.1 x 5.5 x 12mm female barrel, centre -ve
Dimensions: 93mm(L) x 58mm(W) x 33mm(D)
Protection: Short circuit, overload and over voltage protection
Approval: CE, UL, cUL, TUV, CB, BSMI, RoHS and WEEE
Weight: ~200g

Guitars