 |  | Shure MC50B Subminiature Electret Condenser Lavalier Microphone Microphones Shure Microphones
Shure Shure
Shure MC50B Subminiature Electret Condenser Lavalier Microphone MC50 (omni) Black: Intended for hardwired applications. A WL50 microphone supplied with an in-line preamplifier with a three-pin male XLR audio connector. The Shure MC50 (Omni) is a subminiature, electret condenser lavalier microphone. It provides uncompromised sound quality and high reliability with minimal visibility in sound reinforcement applications such as television broadcasting and stage performances. Despite its small size, the microphone's condenser element provides full, clear and natural reproduction of speech. Each microphone is supplied with two foam windscreens to minimize wind noise. The supplied mounting accessories consist of a lapel clip, a tie clip, a pin mount, and a magnet mount, giving the user a wide variety of options for placement. Features:
Extended frequency response with user changeable equalization caps for response shaping (omni only)
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability
Includes In-line preamplifier and 5-foot (1.5m) cable with TA4F connector
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens Specification:
Type: Condenser (electret bias)
Polar Pattern: Omnidirectional
Output Impedance: 136 ohms actual (rated at 150 ohms)
Output Level: -41.0 dBV/Pa
Maximum SPL: 138 dB at 1% THD/1 k ohm load
Frequency Response: 20-20,000 Hz
Dynamic Range: 108.0 dB
Output Noise (equivalent SPL, A-weighted): 30 dB typical; 33 dB maximum
Signal-to-Noise Ratio: 64 dB at 94 dB SPL
Power Requirements: 11-52V DC (positive on pins 2 and 3, return on pin 1)
Current Drain: 4.6 mA
Polarity: Positive pressure on the diaphragm produces a positive voltage at pin 2 relative to pin 3 of the output connector of preamplifier
Overvoltage protection: ±75.0 Vdc maximum from pins 2 and 3 to pin 1
Cap and Overmold Material: Polypropylene
Environmental Conditions: Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F), Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F), Humidity: 0 to 95%
Packaged Weight: 305 g (10.76 oz.)
Cable and Connector: 1.5m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type).
Preamp Dimensions: 20mm (.79") diameter, 99mm (3.89") length
Net Weight: 121 g (4.3 oz.) with cable, connector, and preamplifier |
Pro-Audio- Acoustic Treatment
- Audio Software
- Computer Hardware
- DJ/Samplers/Sequencers
- Drum machines/mods
- Headphones
- Keyboards/Modules
- Microphones
Accessories for Large Diaphragm Condensers, Condensers, Handheld/Vocal Microphones, Headset Microphones, Instrument/Other Microphones, Large Diaphragm Condensers, Miniture/Clip-on Microphones, Ribbon Mics, ShockMounts/Accessories, Small Diaphragm Condensers, USB Microphones, Valve Microphones, Video Microphones
- Mixing Desks
- Multi-Media
- Portable Keyboards
- Studio Monitoring
- Studio Outboard
- Studio Recording
|
Errors & omissions excepted, © Copyright 2002-2009 GAK.CO.UK LTD
|

|  | | Search |
|---|

|
 |