 |  | Shure MX183 Microflex Wired Lavalier Microphone Microphones Shure Microphones
Shure Shure
Shure MX183 Microflex Wired Lavalier Microphone They're no bigger than a paper clip unless you consider the sound they produce. The Microflex Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there's a Microflex Lavalier that's right for your job. The Microflex Lavaliers are completely compatible with all Shure Wireless transmitters, and their high sensitivity and wide frequency response guarantee great sound with a minimum of RF interference or electromagnetic hum. Plus, each Microflex Lavalier features the same Shure quality sound that has become an industry standard. Features:
Pivoting, Single-Microphone Tie Clip, included
Dual Microphone Tie Clip, included
Black, Snap-fit Foam Windscreen, included
Belt-Clip Preamp 4-foot cable with 4-pin TA4F Connector, included
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal choice for each application
Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
Supplied snap-fit foam windscreen that controls breath noise and stays on securely
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied dual tie clip holds two microphones for dual miking applications Specifications:
Type: Condenser (electret bias)
Frequency Response: 50-17,000 Hz
Polar Pattern: Omnidirectional
Output Impedance: EIA rated at 150 ohms (180 ohms actual)
Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pa): -27.5 dB (42.2 mV)
Max SPL (1kHz at 1% THD, 1 kohm load): 116.7 dB
Equivalent Output Noise (A-weighted): 20.5 dB
Signal to Noise Ratio (referenced at 94 dB SPL): 73.5 dB
Dynamic Range at 1 kohm load: 96.2 dB
Power Requirements: 11-52V DC Phantom, 2.0 mA
Common Mode Rejection: 45.0 dB minimum
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Environmental Conditions: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Storage Temperature Range: -29 to 74 degrees C (-20 to 164 degrees F)
Cable: Shielded 1.2 meter (4 ft.) cable terminated with a 4-Pin Female Mini Connector (TA4F)
Dimensions: Capsule: approx. 12mm (0.46") diameter, 22mm (0.85") length, TA4F connector: approx. 20mm (0.79") diameter, 99mm (3.89") length |
Pro-Audio- Acoustic Treatment
- Audio Software
- Computer Hardware
- DJ/Samplers/Sequencers
- Drum machines/mods
- Headphones
- Keyboards/Modules
- Microphones
Accessories for Large Diaphragm Condensers, Condensers, Handheld/Vocal Microphones, Headset Microphones, Instrument/Other Microphones, Large Diaphragm Condensers, Miniture/Clip-on Microphones, Ribbon Mics, ShockMounts/Accessories, Small Diaphragm Condensers, USB Microphones, Valve Microphones, Video Microphones
- Mixing Desks
- Multi-Media
- Portable Keyboards
- Studio Monitoring
- Studio Outboard
- Studio Recording
|
Errors & omissions excepted, © Copyright 2002-2009 GAK.CO.UK LTD
| | Basket Summary |
|---|
Your shopping basket is currently empty  | |

|  | | Search |
|---|

|
 |