 |  | Alesis Monitor 1 Active Mk2 Studio Monitoring Active Monitors Alesis Studio Monitoring
Alesis Alesis Active Monitors Alesis M Series
Alesis Monitor One Active MK II
Professional Accuracy, Clarity and Performance in an Affordable Powered Monitor. By combining Alesis' expertise in reference monitor design with their proven track record in studio amplification, Alesis' new M1 Active™ Biamplified Reference Monitor offers the incredibly accurate response that perfectly translates to every playback system. Its internal active crossover and custom-designed dual amplifiers ensure an extremely consistent performance under a variety of different studio conditions and program material. The result is a broad, extremely flat frequency response, clear imaging with a wide sweet spot, high power handling and detailed high- and mid-frequency response that only a professional powered monitor can deliver. Custom Drivers Designed For Active Monitoring The M1 Active's woofer and tweeter were specifically designed for the most linear, low distortion response in powered monitoring applications. Its 6.5" woofer cone is formulated from non-woven carbon fiber. It's a material that has been used for the skins of combat aircraft wings, since it offers high tensile strength and low weight. In fact, carbon fiber is 25% lighter than polypropylene (the most common driver material) and hence provides quicker transient response in the low frequency range for superb bass response as well as a vast improvement in the detail of critical upper-mid frequencies. The M1 Active's 1" tweeter dome is made of pure silk, which offers a natural response that aids in preventing ear fatigue during long mix sessions. It also features an internal pole piece mounted phasing plug and is ferrofluid cooled to maintain the best balance of transient response to power handling. Active Bi-Amplifiers and Electronic Crossovers Two audiophile-quality amplifiers-a 75 watt woofer amp and a 25 watt tweeter amp-were developed for the M1 Active, along with 8th order high- and low-pass electronic crossover filters. The crossover point was carefully chosen at a low 1500Hz, and produces an extremely wide dispersion zone as well as low midrange coloration. Also, the special time alignment circuitry that's been added to the tweeter section of this crossover allows the output of frequencies from the high and low drivers to occur in perfect synchronization, avoiding the time smear that's typical in less advanced powered speakers. Attractive Cabinet Design with Dual Ports and Offset Tweeter In developing the M1 Active, the Alesis engineering team discovered that dual font-mounted ports provided the fastest, most coherent and extended low frequency augmentation. Also, the unique offset design of the high frequency driver allows for the flattest frequency and power response in a speaker that offers such wide dispersion. The M1 Active's attractive mirror-imaged, charcoal-toned cabinet and magnetically-shielded drivers allow for placement in close proximity with computer or video monitors, and offers the added benefit of blending beautifully into your studio's decor without being obtrusive. They may be mounted in either a horizontal or vertical placement to best fit your studio's requirements. The Alesis M1 Active ™ With the lineage of Alesis' TEC Award-winning Monitor Onet Studio Reference Monitor, Alesis speakers have already become a standard in project and professional studios around the world. If you're looking for the same great accuracy and detailed response in a powered system that's truly affordable, the answer is clear: the new M1 Active from Alesis. . Alesis Monitor 1 Active MK 2 Specifications:
Low Frequency Driver: 6.5" non-woven carbon fiber with Santoprene surround and dual magnet shielded configuration
High Frequency Driver: 1" silk dome with medium viscosity ferrofluid coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, "optimal Q" high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion: less than 0.03% thd @ 30w lf amp slew rate:19V/µsec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion: less than 0.06% thd @ rated power
LF amp slew rate less than 9V/µsec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4" jack with input level control
Dimensions: (WxHxD) 8.5"x15"x9.75" (381mm x 216mm x 248mm)
Weight: 19.5 lbs. (8.9kg) each
| Customers who bought this item also bought:
| | | | | | Beyerdynamic DT 770 Pro GAK Price: £  Inc. VAT CHEAP DELIVERY ! (From £ )
Beyerdynamic DT 770 PRO Features: Closed studio headphone, equalized to meet diffuse field EQ requirements Innovative bass-reflex-system Robust spring steel headband Single-sided cable Soft headpad Gold plated jack-plug Applications: The DT 770 PRO is a closed dynamic headphone and was designed for critical music and sound monitoring in an open environment. Read more
Click here for more Beyerdynamic Closed Headphones | | | | | |
| | | | | | Rode NT-1a + FREE PopShield, Stand & Lead!!! GAK Price: £  Inc. VAT CHEAP DELIVERY ! (From £ )
Rode NT-1a + FREE PopShield & Lead Large 1" Capsule with gold plated membrane Cardioid polar pattern Ultra low noise transformerless circuitry New state of the art surface mount electronics Heavy duty satin nickel finish Monocoque sub assembly Internal shock mounting system Gold plated output connectors True condenser (externally biased) Full frequency response Comes supplied with NTSM shockmount Say NO to noise!The New RØDE NT1-A is one of the world?s quietest microphones. Read more
 Click here for more Rode Large Diaphragm Condensers | | | | | |
| | | | | | Stagg MIS-2022 BK GAK Price: £ Inc. VAT
Microphone boom stand w/folding legs, heavy model - Height range : 103 to 167 cm / 40.55 to 65.75 in - Max arm extension= 62 cm / 24.4 in - 3/8" mounting thread - Weight : 3.7 Kg - Spare parts : (1) rubber foot/ (2) bush & (3) sleeve for (4) telescopic clamping sleeve/ (5) 3/8" thread locking washer/ (6) spare knob for base/(7) cable clip/ (8) knurled knob & (9)rubber friction washer for (10) square neck coach/ (11)locking screw for boom section/ (12) metal washer/ (13) square neck coach bolt - Colour: Black. Read more
Click here for more Stagg Stands | | | | | |
| | | | | | Hosa CSS 510 GAK Price: £ Inc. VAT CHEAP DELIVERY ! (From £ )
10ft balanced jack to jack cable Great For Long Runs; now you can connects powered monitors, and other equipment requiring long balanced cables! Professional Grade, Heavy-Duty cabling. The CSS-500 Series serviceable 1/4" plugs. Read more
Click here for more Hosa Cables | | | | | |
Pro-Audio- Acoustic Treatment
- Audio Software
- Computer Hardware
- DJ/Samplers/Sequencers
- Drum machines/mods
- Headphones
- Keyboards/Modules
- Microphones
Condensers, Handheld/Vocal Microphones, Headset Microphones, Instrument/Other Microphones, Large Diaphragm Condensers, Miniture/Clip-on Microphones, Ribbon Mics, ShockMounts/Accessories, Small Diaphragm Condensers, USB Microphones, Valve Microphones, Video Microphones
- Mixing Desks
- Multi-Media
- Portable Keyboards
- Studio Monitoring
- Studio Outboard
- Studio Recording
|
Errors & omissions excepted, © Copyright 2002-2007 GAK.CO.UK LTD
| | Basket Summary |
|---|
Your shopping basket is currently empty  | |

|  | | Search |
|---|

|
 |