Dynaudio BX 30

The BX30 Subwoofer has been specially designed to compliment the active BM6A and BM15A monitors in both stereo and 5.1 setups. But being very versatile, multiple BX30’s will compliment larger 5.1 setups, (consisting of for example five M1.5’s), providing a very powerful system for your 5.1 studio.

The BX30 is equipped with a 305mm woofer in a ported cabinet. Dynaudio leading edge technology allows tuning of the bass driver and cabinet provi-ding you with an incredible increase of energy in the lowest frequency range.
The motor of the driver is a huge 102mm voice coil in combination with an extended magnet system.

The amplifier construction is especially designed to get maximum energy from the woofer. The BX30 has electronically balanced stereo Inputs and Outputs on 3 pin XLR connectors. The internal filtering of the BX30 is user selectable. To optimize the bass performance in combination with the main speakers, the phase is continuously djustable from 0º to 360º. Using the special utility In/Output several subs can be
connected parallel.

Specifications:

• System 1-way Active subwoofer
• Frequency Response (+/- 3 dB) 22 Hz - 80/95/120 kHz
• Max SPL 1m, pair
• (IEC Long Term) 118 dB peak (one speaker)
• Max SPL 2m, 5.1
• (IEC Long Term) -
• Input level for 85 dB
• SPL @ 1m (+4/-10) -28 dBu RMS / -42 dBu RMS
• Input level for max peak SPL (+4/-10) +6 dBu peak / -9 dBu peak
• Power consumption Idle: 25 W / Max: 900 W
• Amplifier power Woofer: 130 W
• Resonance Frequency 30 Hz
• Internal Cabinet Volume 76 liters
• Bass Principle Bass reflex
• Crossover Frequencies Switch: 80/95/120 Hz, Out: 95 Hz/direct
• Crossover Slope 24 dB/oct
• Tweeter - Woofer 30 cm, One piece molded polypropylene cone, 100 mm Pure alu wire voice coil
• Weight 30 kg
• Dimensions (WxHxL) 410 x 613 x 540 mm