 |  | Mark Bass LMK Bass Amplifiers Heads Mark Bass Bass Amplifiers
Mark Bass Mark Bass Heads Mark Bass Amplifier Heads
Mark Bass LMK
This head's true two channel preamp is built for versatility. You can use the LMK with two basses (using separate EQ and level settings for each instrument) or you can switch between the channels to use two different sounds with one bass. You can even combine the settings of both channels! Incredibly, this glorius little amp weighs in at just under 6 lbs!
Specifications:
INPUTS
INPUT A (master)
impedance 500 Kohm, max. voltage 15 Vpp
INPUT B
impedance 500 Kohm, max. voltage 15 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN CH1
–80 dB to +23 dB range
GAIN CH2
–80 dB to +26 dB range
LINE OUT
level control on front panel
GROUND LIFT
switch on rear panel
EQUALIZATION
CH1
LOW
center frequency: 60 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range cut: 250 Hz – 20 kHz
CH2
LOW
center frequency: 60 Hz; level ±16 dB
LOW-MID
center frequency: 360 Hz, level ±16 dB
HIGH-MID
center frequency: 800 Hz, level ±16 dB
HIGH
center frequency: 5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 standard rack units
WEIGHT
6.39 lbs / 2.9 kg
FOOTSWITCH
CH1, CH2, CH1+CH2, mute
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
|
Errors & omissions excepted, © Copyright 2002-2009 GAK.CO.UK LTD
|
| | | Search |
|---|
|
|
Inc. VAT
Ask us a question
Home
Basket
Checkout
Order Tracking
Contact Us