Rode Classic II + FREE RPS-1000 PopShield

CLASSIC II

From its custom designed Jensen transformer to the dual pressure gradient transducer this valve microphone is a Classic.

Machined from solid brass, hand polished,glass bead blasted and coated in satin nickel,this is a microphone with Class A valve circuitry that gives unmatchable warmth,clarity and sensitivity when critical vocal and instrument recording is required.

The Classic II when a Classic performance is needed.

Features:

• Class A valve circuitry
• Dedicated Power Supply
• 6072 Twin Triode
• New "edge-terminated " 1"Gold sputtered Diaphragm
• Custom designed JENSEN Transformer
• -10dB and -20dB Pads (Switched from power supply)
• 2 position High Pass Filter (switched from power supply)
• 9 polar patterns (switched from power supply)
• Double Shielded Oxygen Free Copper Multicore Cable with custom designed heavy duty plugs and sockets.
  

Specifications:

• Capsule: Externally polarised dual diaphragm 25mm (1") condenser
  
• Active Electronics: Thermionic impedance converter
  
• Pickup Pattern: Switchable Omnidirectional / Cardioid / Figure-8 in nine steps
  
• Frequency response: 20 Hz-20 kHz
  
• High Pass Filter: Switchable: flat, -15dB @ 20Hz, -21dB @ 20Hz. Cascaded first-order filters
  
• Output Impedance: 200
  
• Sensitivity: -37dB re 1volt/pascal (14mV @ 94dB SPL) +/-2dB
  
• Equivalent Noise: <18 dBA ("A"-weighted per `IEC268-15)
  
• Maximum Output: +2dBu (@ 1% THD into 1K)
  
• Dynamic Range: > 113dB (per IEC268-15)
  
• Maximum SPL: 131dB SPL (@ 1% THD into 1K)
  
• Signal/Noise Ratio: > 76dB (per IEC268-15)
  
• Power Requirements: Dedicated Power Supply (110 ~ 120V/220 ~ 240V, 50/60 Hz) Packed
• Weight 8.7kg (Mic only 1.044kg)